Wax Additives for Waterborne Printing Inks and Waterborne Varnishes

Wax Additives for Waterborne Printing Inks and Waterborne Varnishes Wax Additives for Waterborne Wood Coatings and Wood Colorants Wax Additives for Waterborne Leather Finishes and Wax Additives for Floor Polishing Lubricant Wax Additives High Density Polyethylene Wax (Physical and Chemical Properties) for Metal Stamping and Lubrication

WJX-810 Wax Emulsion improves the film-forming properties of water-based coatings, water-based leather finishes, and inks. The product is characterized by a very low emulsifier and the wax it uses has a very high hardness at high temperatures.
Technical specifications:
Appearance: Light Yellow Liquid Wax Type: Hard Polyethylene Wax Solid: 35%
Emulsification type: Non-ionic/anionic softening point: about 137°C
PH value: about 8.5-9.5
Density: 1.0
Usage: Add 3%-8% of the total formula.
Add performance in the post-production stage by stirring:
ULTRALUBE WJX-810 is used in:
Varnish (parquet flooring, furniture), printing inks (flexo), varnish, water-based leather finishes, floor polishes can be effectively increased in the case of high gloss:
Slickness, anti-caking, abrasion resistance, water resistance, scratch and abrasion resistance, dirt adhesion.
store:
This product can be stored at +6-28°C for at least 6 months to avoid freezing and high temperatures exceeding 40°C! !
FDA/BGVV Terms:
There are restrictions in the FDA and you can contact us for details.
Not applicable to BGVV terms.
Dangerous goods are classified:
ULTRALUBE WJX-810 is not a dangerous product under ADR, IMCO and UN-NR terms.
Packing specification: 120 kg/barrel,

Source: Waterborne Coatings Network