When some consumers buy solid wood flooring or solid wood furniture, they will be influenced by some reasonable thoughts and social misunderstandings. In the subconscious, the floor should be considered as heavy as possible. The quality of the weight is the heavier the wood. Ok, this is true!
Misunderstanding! Look smart and good practice
Wrong too! The weight of the wood is related to the air dry density. The finer the wood fiber, the higher the air dry density of the floor and the heavier the weight. However, the heavier the floor, the higher the water swelling rate, and the higher the shrinkage rate when spitting. In other words, the heavier the floor densities are, the bigger.
There is a very savvy customer. When the shopping guide said that the red oak is heavier and more stable than the mahogany, he took a piece of red oak and mahogany in the water for experimentation, the same oily floor, in the water. After soaking for three days, the red oak expanded more than the peach heart.
Stable or not and the relationship between weight is minimal
In fact, the oily long-term dyeing in wood fiber makes every subtle part of the floor have the nature of not being afraid of water. From the stability of the floor use, it has nothing to do with the weight. From the actual use effect, the floor The heavier and more stable the conclusion is not precise.
Coincidentally, when people buy solid wood furniture, they will encounter some less professional rhetoric. "You see that this rubber wood partition is so heavy. You don't print it with your hand, which means the wood is good." "You see that our wood is very thick and has a very high hardness, second only to mahogany. The quality is of course good." When some consumers are asking about the stability of furniture, the salesmen will say that the wood used is hard, so stability Very good.
Related reading: Demystifying the scam tricks of timber operators
The right point! Listen to Sun Shudong how to say
Sun Shudong, director of the Furniture Inspection and Wood Identification Laboratory of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, said that the more stable the wood, the more stable it is. Like some stable woods such as teak, pineapple, Indonesian mahogany, etc., their density is not high, and the high density and quality are not necessarily proportional, not high density can be called good wood.
Wood does have the problem of swelling and shrinking, but if the production process is in place, the wood is well-dried, and the seams are in place. Solid wood furniture and solid wood flooring are difficult to crack and deform. For example, in the production process of solid wood flooring, the most important thing is the wood drying process. If the drying is not done well, the finished floor will be easy to crack and deform. If it is dry, the wood itself will be relieved of stress and will not be deformed. Cracking problem.
Dry health balance and elimination of G points
The solid wood floor takes about 30 to 40 days to make the moisture content reach 30% natural drying; it takes about 10 to 30 days to make the water content below 10% artificial drying, and the process also distills the pulp in the wood. Come out, balance the wood cell wall structure, the shrinkage performance tends to be stable and consistent; and the 10 to 20 days of health treatment, to achieve the specified water content of the environment characteristics of the use of the environment, to eliminate the existence and production of wood during the growth and processing Stress, so the solid wood floor is very stable.
Buying mistakes, big eyes, seeing clearly
1, on the two pounds to buy, on the two sellers:
The quality of the floor cannot be measured by weight;
2, on the long and short buy, on the sale of narrow and narrow:
The floor can't be bought and sold in the size of the specification. Relatively speaking, the floor with smaller specifications will have better stability.
3. Blindly pursue the preciousness of the tree species:
Valuable trees are rare and need to find a brand with a rich history;
4, the cheaper the better:
Some small manufacturers openly sell inferior products and unqualified products on the grounds of discounts, promotions, and price cuts. Please keep your eyes open, listen to other people's opinions, and don't be fooled by those businesses.
Large capacity: This automatic hand sanitizer dispenser has a large capacity of 1000 ml,suitable for use of various disinfectant liquids, liquids and hand sanitizers. for daily use and professional use, perfect for home, hotels, hospitals or other public places. Automatic sensor operated: the touchless hand disinfection machine is designed to nebulize hand sanitizer or alcohol, and provide automatic dosage of spray, which enables a quick and easy hand disinfection and eliminates cross contamination, achieving optimal hand hygiene.
Wall-mounted or Stand Style: Wall mounted soap dispenser that works well in keeping the counter surface clutter free. Battery Operated and Rechargeable:This alcohol hand sanitizer soap dispenser is operated with batteries.This disinfectant hand sanitizer also can be rechargeable with an adapter.(Not equipped with 6V 1A DC Adapter and 4pcs NO2 batteries (C battery))
Convenient and Hygienic: Just put your hand under the sensor to start the soap dispenser, you can effectively avoid cross infection without touching the soap dispenser. Suitable for public places such as offices, hotels, hospitals, medical institutions, schools, etc.
soap dispenser,K9 pro dispenser,automatic soap dispenser,sanitizer dispenser,hand sanitizer dispenser
Shenzhen Lanejoy Technology Co.,LTD , https://www.szcoolingrack.com