Factors Affecting Die-cutting Performance Analysis (1)

1. Influence of processing quality and assembly accuracy of each component

Judging from the individual technical parameters of the die-cutting machine, the difference between domestic die-cutting machines and foreign die-cutting machines is small, but there is a large gap between the die-cutting speed, accuracy, stability, and reliability. Mainly due to the limitations of the domestic manufacturing technology, many parts of the rough processing, the error range is relatively large, the assembly is also not accurate enough, resulting in the machine is not running fast enough and die-cutting accuracy is not high enough. For example, the matching and manufacturing accuracy between the intermittent mechanism and the main drive system and the chain row directly affects the speed of the machine. If the assembly accuracy is not enough, the precision of the cutting will be affected and the noise will increase. Another example is the matching of the pressure mechanism of the toggle lever and the moving platform. Because there is relative movement, there must be a gap. If the gap is determined irrationally, it will cause impact load, generate vibration, cause noise increase, and then affect the speed and precision of die cutting.

2. Effect of paper feeding speed and positioning mechanism

At present, the paper-feeding method commonly used at home and abroad is continuous paper feeding, that is, there is always a partial overlap between the front sheet and the back sheet. This method is smooth and fast. However, the speed of paper feeding is high, and the paper will have a large impact force when it is against the forward gauge, which will easily cause the paper to curl or bounce, resulting in inaccurate positioning and reduced accuracy. Therefore, an ideal die-cutting machine should minimize the speed of paper movement on the paper-feeding table while ensuring the cutting speed, thereby reducing the paper's impact on the front gauge, ensuring accurate positioning, and improving die-cutting precision.

The print is positioned by the positioning mechanism prior to die cutting. The positioning mechanism of the die cutting machine consists of a front gauge, a side gauge, a front abutment mechanism, and a backrest gauge mechanism. The positioning mechanism has a crucial influence on the accuracy of the die cutting machine.

Before the paper enters the gripper row, it is positioned by the front gauge and the side gauge. The role of the front gauge is to longitudinally position the paper. If there are multiple front gauges installed, only two positioning functions are used. Accurately on the same level, it must play an auxiliary role; otherwise, it will cause over-positioning and reduce the positioning accuracy. The height of the front gauge is adjustable, the height of the gauge is moderate, the height of the front gauge is moderate, and the front gauge is adjusted too high, which can cause the front edge of the paper to bend, which affects the positioning accuracy. The front gauge is adjusted too low and the paper cannot reach the front gauge. Does not achieve positioning effect. Lateral gauges are used for lateral positioning of the paper. There are usually two side gauges, but only one when working. In order to ensure accurate positioning, the side pull roller pressure should be appropriate. Pulling the paper roller too much pressure will cause the side of the paper to bend; if the pressure is too small, it may cause the paper to not be pulled out, affecting the positioning accuracy. In addition, due to the fixed positioning time, the positioning time of the front gauge and the side gauge will also affect the positioning accuracy, and thus affect the accuracy of die cutting, so we must reasonably allocate the positioning time of the front gauge and the side gauge.

After the paper is positioned, the paper is conveyed to the molded part by the feed roller for die-cut indentation. The feed line is fixed on the intermittent conveyor chain. To ensure the precision of die cutting, it must stay in the exact position. Therefore, when the feed dog row moves to the end of the paperboard, the front abutment mechanism pulls the tooth row shaft to a determined position and completes the front positioning of the feed dog row. When the transport chain evacuates the transporter between the platform and the lower platform of the molded part, the rear abutment mechanism toggles the row of teeth to the positioning point for accurate positioning. Therefore, the front gauge and back gauge mechanism directly affect the die cutting accuracy.

3. Influence of the intermittent mechanism, chain, and paper feed

The movement of the feed roller is an intermittent motion controlled by an intermittent mechanism. Flat press die cutting machine intermittent mechanism generally adopts parallel indexing cam mechanism. Compared with other intermittent mechanisms, it has the following characteristics: reliable movement; smooth transmission; follower movement law depends on the contour of the cam; the dial can achieve the desired Movement and good dynamic performance, the positioning of the turntable in the interval is completed by the curve groove of the cam, no additional positioning device is required. When the machine is running at a high speed, the cam profile is affected by the speed, acceleration, inertia size and direction of the follower, causing machine vibrations. This vibration is transmitted to the chain, and the rapid start and stop can cause jitter in the feed bar row. This affects the speed and accuracy of the entire machine. Therefore, on the basis of dynamic analysis, it is also necessary to dynamically design the cam profile to ensure the smooth movement of the intermittent mechanism itself.

The chain is a flexible piece and the pins are connected between the links. Therefore, the pitch error is large. For a long time, due to the wear, the chain will naturally elongate, and the error will increase, which will cause instability to the transmission, affect the position of the positioning point of the paper feeding tooth row, and thus affect the precision of die cutting. When working, the chain should not be too tight or too loose. Too tight the chain wears up and shortens the service life of the chain. Too loose the chain is vibrating and the noise increases.

The paper feed is used to transport paper. The flat press and die cutting machines use solid tooth rows, which are easily deformed during high-speed operation of the machine, affecting the positioning accuracy, and because of its high quality, it is in the process of rapid transit and instantaneous stop. , Due to large inertia, it is not easy to stop, affecting the stability of machine operation and die-cutting accuracy. Therefore, changing the solid tooth row into a higher hardness hollow row is the direction of future development. In addition, the grippers generate noise during work, causing vibrations in the row of teeth, which in turn affect the speed of die cutting, but also affect other components. Generally, the following measures can be taken: (1) The plug clearance should be as small as possible; (2) The gripper should be staggered with the regulatory plate; (3) The dental caries angle should be adjusted appropriately. In addition, the pressure of the gripper will affect the precision of die-cutting, and the pressure of the gripper will cause the paper to be damaged; if the pressure is too small, it will cause the paper to slip or slip during the transfer process; the pressure between the grippers is not Both may cause the paper to be skewed when it is die cut.

4. The influence of the chain guide

During the die-cutting process, the paper is driven through the chain. In addition to the chain wheel and the sprocket, the chain passes through and rotates. The guide rail positions it and controls the direction of movement of the chain and the teeth row. Therefore, when installing and debugging the guide rail, it is necessary to ensure that the guide rail is of appropriate thickness and can be embedded in the chain. The distance between the upper and lower guide rails must ensure the smooth passage of the chain. If the distance is too small, it will increase the transmission resistance and affect the transmission speed. In severe cases, it may even damage the machine. If the distance is too large, the chain will easily jump during movement and affect the transmission accuracy. Impact die-cutting accuracy. In addition, the trajectory of the guide rail and the length of the chain have a certain influence on the performance of the machine.

Free Sample Good selling warm shoulder strap pad shoulder wrap brace

Product name: Shoulder Pads, the colors are black and blue. 

material is neoprene which will be very comfortable to fit your shoulder, and ease pain in your arms and make your arms looks more beautiful, the logo Can be OEM which means you can order the products in our company and have your own logo on it to extend the business in your country or throughout the world.

color any other are available per customer's requests

features shoulder protect

packing OPP.PVC.graphic carton

shoulder pads

shoulder pads 2018

Shoulder Pads

Shoulder Pads,Mens Shoulder Pads,Shoulder Brace,Shoulder Support Brace

Yangzhou Sainuo Star Sports Products Co., Ltd. , http://www.cnsportsgoods.com