Due to the strong market competition, the pressure on enterprises is increasing, and the efficiency of office work is getting higher and higher. The frequency of use of office laser printers is very high, and it is often necessary to add powder. So, what are the laser printer powdering steps? Below, Xiaobian brings you a detailed introduction.
What are the laser printer powdering steps:
To prevent incompatibility between the added toner and the original toner, wipe off the toner on the magnetic roller with a cloth. Adding powder starts, stacking a piece of waste paper into a notch shape, which is convenient for adding powder to the powder bin. When adding powder, the bottle mouth moves back and forth to the left and right, so that the toner is evenly added to the powder bin. There are also ways to remove the lid from the powdered port next to it, which is really convenient, but if the lid is removed and re-closed, the sealing performance will be poor, which will cause powder leakage. After adding the toner, install the magnetic roller and close the gear cover. Be careful not to lose or reverse the gear. Carry out the final assembly, close the cleaned waste toner bin and the developing cartridge after the toner is added. Note that the small springs on the left and right sides should not be lost and should be installed in place. Finally, find out the two small iron pins that were pulled out in front, and press the small iron pin according to the position to keep it level with the plastic mouth. The whole process of adding powder ends. During the powder change process, the drum core is taken out and immediately wrapped in newspapers. It should not be exposed to the outside for a long time, so as to affect the secondary use.
The above is the laser printer powdering step. I hope that the above contents can help everyone. When adding laser powder to the laser printer, pay attention to the installation of the gears and avoid the influence of the loading process.
Metal Trivet,Steel Trivet,Stainless Steel Trivets,Metal Trivet Stand
Jiangmen Sunbond Houseware Manufacturing CO.,LTD , https://www.jmsunbondhw.com