Things you should pay attention to after purchasing a snow ice machine

After purchasing the Shanghai Bilang Snow Ice Machine, if you want the ice machine to last longer, you should pay attention to the installation of the ice machine should be installed away from heat sources, no direct sunlight, well ventilated place, the ambient temperature should not exceed 35 ℃ In order to prevent the ambient temperature from being too high, it will cause poor heat dissipation of the condenser and affect the ice making effect. The ground on which the ice machine is installed should be solid and level, and the ice machine must be kept level, otherwise it will cause no ice removal and noise during operation.

For safety reasons, it should also be noted that the ice maker should use an independent power supply, dedicated line power supply and be equipped with fuses and leakage protection switch, and must be reliably grounded. The gap between the back and the left and right sides of the ice making machine should be no less than 30cm, and the gap between the top should be no less than 60cm.

Matters necessary for snowflake ice machine:

1. It is strictly forbidden to directly flush the body with a water pipe, use neutral detergent to scrub, and it is strictly forbidden to use acidic, alkaline and other corrosive solvents.

2. It is necessary to unscrew the head of the water inlet hose for two months, and clean the water inlet valve filter to avoid the sand and mud impurities in the water from clogging the water inlet and causing the water inlet volume to become small, resulting in no ice making.

3. The dust on the surface of the condenser must be cleaned every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the surface of the condensate. Do not use sharp metal tools to clean it, so as not to damage the condenser.

4. The water pipes, sinks, refrigerators and protective films of the ice machine must be cleaned every two months

5. When the ice machine is not in use, it should be cleaned, and the water in the ice mold and the box should be dried with an electric blower, placed in a place free of corrosive gases and ventilated and dry, avoiding open storage.

5Pcs Synthetic Contouring Sculpting and Highlighting Kit Powder Blush Fan Brush Set for Nose Cheek Neck

Set Includes:

#1 Round Angled Contour Brush;

#2 Flat Contouring Brush;

#3 Precision Angled Eyeshadow Brush;

#4 Tapered Highlighter Brush ;

#5 Fan Brush;

How to Clean Eye Makeup Brushes:

1. Holding bristles face down, run bristles under warm water.

2. Gently squeeze out any excess water and makeup residue.

3. Apply a dime size amount of mild soap and olive oil into the palm of your hand.

4. Massage the bristles into your palm in a circular motion under running water until the water runs clear, being careful not to submerge the brush.

5. Gently squeeze out any excess water using a clean towel.

6. Let the bristles air dry in an open space.

Please note that if our makeup brushes smell like paint since they have been sealed in the bag for long time, don't worry! Just wash them in water with little shampoo and wait them dry, the smell will disappear!

5pcs Makeup Brush Set

Pink Makeup Brushes,Custom Logo Makeup Brushes,5Pcs Makeup Brush Set,Pink Head Makeup Brush Set

Luyi County Jiamei Cosmetic CO.,Ltd , https://www.eyelash.show