Six points to pay attention to the wardrobe decoration design

[ Zhonghua Wardrobe ] Most of the current buildings are frame structures. Therefore, if you want to make a wardrobe in the bedroom, you will inevitably encounter special obstacles such as beams and pillars. How to make precautions in the decoration design?

wardrobe

First, the pillar plate and the girder plate can be designed according to the shape of the beam and the column, and the beam and the column are hidden, and not exposed, so that the wardrobe forms a joint body, and the space is rationally utilized. The 18mm thick plate is required for the column and the cladding beam to ensure that the assembled overall wardrobe is firm.

Second, there is a pillar position, which can be designed as a floor for stacking small items or a special place for resting shoes, hats, ties, and the like.

Third, if there are objective beams and columns, the overall wardrobe design should also consider the left and right wide side panels of the light should be open L-shaped integral panels.

Fourth, the sliding door is designed to the top of the ceiling, and the side of the front side of the beam should be sealed by the same size as the beam, and the seam is sealed from the bottom of the beam to the floor to ensure that the sliding door can be completely closed when closed.

Fifth, if the overall wardrobe is designed such that the top cabinet is a wooden board that is flattened and the lower cabinet is a sliding door, the side of the front side of the beam should pass through the same size as the beam, from the bottom of the beam to the lower cabinet. The top plate seams it.

Sixth, if the cabinet may touch the switch socket, cable TV, broadband socket, etc., the overall wardrobe service provider should be evaluated and measured at the progress of the hydropower wiring to ensure that they can be used reasonably in the future.

Outdoor Travel Tent

Zhejiang Shengfa Textiles Printing&Dyeing.,ltd , https://www.chzjsf.com