Inkjet printers are favored by office users and advertising design users due to their high-quality, high-fidelity printing performance. However, due to the relatively high requirements for inkjet printers, inkjet printers can easily appear if they are not handled properly or meet the printing conditions. malfunction. After a careful investigation, the author discovered that many of the many failures in the use of ink jet printers were caused by the user's misunderstanding of the ink jet printer; here, the author deliberately summarizes several common user errors. Awareness, for your reference, to avoid more breakdowns when using jets in the future.

1, can not use some features

Many users who have just started contact with the jet print are always shocked. They will say that their inkjet printers are not as strong as other users. They will later say that their jetting cannot use certain functions. In fact, this phenomenon is always present. The user does not understand the properties of the spray. For example, many printers currently on the market can not only print ordinary text materials, but also print images or print posters. With this function, the printer can achieve high printing results. However, if users who have just touched the jet do not know this feature, then once they use other printing methods when printing posters or images, the final output will become so poor that these users will be screaming that the printer has appeared. Color cast failure or bad ink quality! In addition, different types of printers may have the same functions, but the corresponding function keys are not in the same position on the printer control panel, so if you find a function in a certain position in the printer, and in addition A printer at the same location, did not find the corresponding function button, do not think this printer does not have this function! In addition, if the user does not set the correct parameters for the printer, it may not be able to use some functions of the printer normally. For example, some printers have a fax function, but if everyone does not connect the printer to the network in advance, this function cannot be used. It!

2, no response to spray

Is there no response from the spray, indicating that the spray itself has failed? Many jet-racing "rookie" users may think so! In fact, although the use of high frequency printers, the phenomenon of minor problems is also normal, but one thing we can be sure is that the printer appears to have no response to such a major problem is still rare, after all, the printer is a high Technical content of electronic products. Of course, those who suspect a printer malfunction are mostly primary users of those printers. They do not pay much attention to the details of some basic operations, resulting in improper operation, causing a malfunction, and thinking that the printer has failed. The author once encountered the phenomenon that the printer could not respond. Later I found out that in the print queue of the printer, many tasks were found to be waiting. This means that there are already many tasks waiting in the printer's cache. When you click the Print command, the print cache cannot accept the new print job. The final result is that the printer does not respond. Therefore, from this point of view, no response from the jet is an illusion. We only need to restart the computer to automatically lose the contents of the printer's cache to solve the illusion of no response.

3, refilling spray ink

Many media have already told you how to refill the cartridges with ink jets. For a time, many jetting first players have learned to embed ink. In their opinion, refilling and jetting ink can save a lot of printing. cost. If it is only from the perspective of consumables, it is really advisable to refill the ink cartridges; unfortunately most of the ink cartridges produced by most manufacturers on the market are not allowed to be filled with other inks. This is the case for inkjet printers. It's a dangerous move; inks bought with cheaper costs can be used, but they don't know that these low-quality inks inadvertently hurt inkjet printers. In severe cases, the life of inkjet print heads may be greatly reduced. . Because the filling of ink is not only qualitatively inconsistent with the original ink, the chemical components that make up the filling ink are also incompatible with the head of the inkjet printer, and may even chemically react with the remaining original ink or corrode the print head, and The physical properties such as the viscosity and density of filled ink are completely different from those of the original ink. When printing, the printing defects such as blocked nozzles, broken ink, multiple inks, and unstable coloring will occur, which will seriously affect the quality of printing and the speed of printing. Also, after the ink cartridge is deactivated for a period of time, the residual ink will erode other related system components of the printer, such as chemical reaction with the cover rubber of the server, corrosion of the cover pen glue, oxidation of the conductive sheet constituting the print head, etc. , which led to the entire inkjet printer working.

4, print page without ink

Is there no trace of ink on the printed page, indicating that the ink in the cartridge has been completely depleted? Currently, almost all ink-jet printer control panels on the market have an ink status indicator. According to the working status of the indicator light, the user can determine whether the ink in the printer has been used up, so that the ink can be replaced in time, but this is not to say that the ink Can the ink be printed out when the indicator light shows ink? Many people suspect that the ink jets may be blocked, and others think that other parts of the printer may be malfunctioning. In fact, the appearance of this phenomenon is related to the user's settings. In general, the user should set the printer to the most state-friendly state when using the ink cartridge for the first time. Used ink cartridges can be reused and printed indefinitely. It mainly depends on what type of printer the printer is when it is used for the first time. If the cartridges are loaded with photo paper for the first time, the printer is actually only playing. Several photos, then the program will often calculate some ink usage; if everyone starts is set to the most provincial state, the program may use less ink to calculate and the ink indicator will still display in the printer when the ink has actually dried up. There is a margin for the ink, which is why the ink indicator is displayed with ink and there is no ink trace on the printed page.

5, print color cast phenomenon

If the color printed by the inkjet printer is not the same as the color displayed on the screen, is it that the jet print has malfunctioned? At least users who have just contacted the jetting shot think so. The main reason for this phenomenon is that the software is not properly set up, either because the printer driver version is too large, or that the user has done some printing software settings. Proper setting. If the cause of the above malfunction is eliminated, we should learn to correct the screen display and the actual printing effect. Different printing software, the specific correction method is not the same, I suggest that when the normal print, open the printer options of common software, record the settings at this time; when there is a fault, you do not need to bother To analyze the reasons, you can easily solve the problem after you restore the previous settings.

6, the same capacity cartridge can print different numbers of paper

In an ideal state, the same number of cartridges with the same capacity can eventually print out the same number of sheets, but in actual situations, this is obviously wrong. Because from a technical point of view, a certain amount of residual ink needs to be retained in the ink cartridge when the ink is not used up, and due to different printer design principles and different usage states of the user, the remaining amount of each ink ink cartridge is different. Therefore, the number of millilitres of ink in the ink cartridge alone cannot be used as a parameter to allow the customer to obtain the correct evaluation criteria. In addition, due to the industry standards stipulated by the Printers Association has not yet been introduced, the current common practice of major printer manufacturers is to print the page number marking method, that is, when the original product is sold will be indicated on the instructions: each type of ink cartridge at a certain coverage rate and accuracy The number of sheets that can be printed is guaranteed. All companies have the same coverage and accuracy requirements. In this way, it provides consumers with a clear comparison and selection criteria, fully protecting the interests of consumers. Most manufacturers often leave a certain amount of margin in order to ensure that the user can print the number of pages specified in the manual under various conditions, so as to avoid the shortage of printed pages when the user frequently switches the printer and cleans the print head. The situation. Some users have questions about the problem of residual ink in ink cartridges without understanding the design principles of the printer and ink cartridges. This is in fact a misunderstanding of how to measure the cost of printing. In order to increase the competitiveness of products, manufacturers are willing to display the low operating costs of the product as much as possible, which manufacturers are willing to say that the ink can be used more clearly? Is not to ensure the user's final print quality and print quality! In fact, the professional print cost evaluation is based on the actual number of prints.