Zhangjiagang Karbon develops a new generation of active epoxy resin thinners

Zhangjiagang Kabang New Material Co., Ltd. has developed a new generation of reactive epoxy thinner. This brand-new Phoslite series thinner has unique advantages: it is environmentally friendly, non-irritating, odor-free, safe and reliable; its adjustable room-temperature curing time can rapidly cure epoxy resin at low temperature; excellent substrate adhesion and mechanical strength , Improve the toughness of epoxy resin; lighten solid color, high gloss, no oil surface and whitening, with better yellowing resistance; flame retardant, can greatly reduce the amount of halogen-containing flame retardant. Kabang New Materials is located on the south bank of the lower reaches of the Yangtze River in the “Golden Waterway” and is located in Zhangjiagang, the most economically developed Yangtze River Delta in China. Founded by several European and American university professors and senior technicians of multinational corporations, the company focuses on the research, development, and production of epoxy curing agents and thinners, and owns a number of advanced technologies. The product is KB-62, and it can replace traditional glycidyl ether thinners such as 501, 692, and 748 due to its halogen-free, odorless, colorless, and strong dilution capability.
The biggest feature of KB62 is that it does not contain halogen, and its halogen content is less than 50ppm (No.SH8105641/CHEM) through SGS detection. It is especially suitable for electronic materials industry and products with high requirements for halogen ion content, and it is colorless and odorless. Non-irritating, green product, especially suitable for high solids and solvent-free epoxy systems; excellent dilution capacity is more impressive, 10phr addition can reduce the viscosity of epoxy resin to 1/1/ 5 to 1/10; For fatty amines or polyether amine systems, KB-62 does not prolong the crosslinking time, it can even speed up the cross-linking reaction and can gel in a shorter time; KB-62 can also be used to increase cross-linking The performance of the post-epoxy resin has better elasticity, and at the same time effectively inhibits the oil surface and the whitening phenomenon on the surface of the cured product, so that the coating has a higher gloss.
This product is a clear, colorless, low-viscous liquid with specific gravity (@25°C) of 1.20, viscosity (cps/25°C) of 12 to 15, and activity equivalent (g/eq) of 102. According to the product as an epoxy reactive diluent can be used: epoxy potting materials, casting materials, adhesives, insulation impregnation, floor coatings, etc., can also be used in polyurea spraying elastomer. The product is packed in 250 kg iron drums. Experts have cautioned that when it is used, it is intended to be waterproof and sealed. In addition, the activity of isophorone diamine curing agent is weak. They also produce bio-source-modified epoxy curing agents that have no irritating odor, instant adhesion, and low temperature cure, have excellent hardness and toughness after curing, and have high adhesion, high impact resistance, and are light and transparent. Medium viscosity, can add fillers.