Shanghai Tingyi Instrument & Meter Technology Co., Ltd. is a high-tech enterprise specializing in the production of universal material testing machines and other intelligent material testing instruments, and has the international standard product certificate issued by the National Standardization Management Committee. Shanghai Ting Technology is a domestically produced electronic universal material. One of the leading companies in the testing machine, with several intermediate technical engineers. The products mainly include all-digital electronic universal testing machine, electro-hydraulic servo universal material testing machine, universal testing machine, computer rotorless vulcanizing instrument and Mooney viscosity meter, electronic tensile testing machine, impact testing machine, laboratory flat vulcanizing machine opener , Rubber and plastics complete testing equipment testing machine factory, electronic universal tensile testing machine, electronic universal testing machine, electronic universal material testing machine and other 8 major systems more than 150 varieties, and can develop various types of special purpose testing machines according to user needs.
Shanghai Ting Technology is a test equipment that is updated on the basis of the universal tensile testing machine. It is a testing equipment prepared by a large-scale test. The horizontal tensile testing machine is compared with the electronic universal testing machine. The operation will be relatively complicated. The following are the 8 points for the correct use of the horizontal tensile testing machine:
1. Do not start the test. Do not click the "Start" test button.
2. Whenever you enter the program, if there is an abnormality or the default load value is different from the previous one, do not test it and refer to the troubleshooting method. The load value of the measurement and control system each time it enters the test interface should be near zero (not zero).
3. Use the cylinder reset button to raise or lower the cylinder piston to the set position. When the displacement display position value is greater than the set position, the piston will drop when the cylinder reset button is clicked; otherwise, the piston will rise. Pay attention to whether the actual position of the piston and the displacement display position are consistent. If the cylinder is actually in the high position, blindly use this button to raise or lower.
4. Do not “zero†the load value after clamping the sample.
5. Install the extensometer, pay attention to remove the positioning pin and then zero; when the extension timing is removed, pay attention to insert the positioning pin to prevent the extensometer from being damaged due to human overload.
6. After the sample is broken, if the program does not exit the test state and prompts the test to end, you must immediately click the stop button to exit the test state.
7. After completing the test exit procedure, the power should be turned off after shutting down with WINDOWS; turn off the oil pump and let the cylinder fall to the end.
8. When the computer is moving, be careful not to loosen the plug.
Tensile machine testing machine tensile testing machine electronic tensile machine universal testing machine universal material testing machine
Kids Toothbrush is designed for children who are developing. It has a variety of types and styles, some toothbrushes are designated to be suitable for the eruption of the deciduous teeth, suitable for the dentition, suitable for the mixed teeth of the milk and permanent teeth, and so on; and some for children 3~6 years, 6~9 years old, and the toothbrush selected according to the condition of the children's mouth; if wearing the oral cavity, the toothbrush is also worn. Some fixed orthodontic appliances should use some special toothbrushes. For example, a toothbrush with a "V" shape.
Kids Toothbrush,Nylon Children Toothbrush,Eco-Friendly Nylon Toothbrush,Electric Toothbrush For Kids
Yangzhou Special Care Daily Products Co., Ltd , https://www.justspecialcare.com