With the improvement of the quality of life, people's demand for bathroom decoration is also increasing, so the shower room quietly entered various families. Not only keeps the outside of the bath room dry, but also provides a comfortable bathing space for people. But how do you install it? Let's take a look at what are the shower room installations ?
1. Preparation for shower room installation
Before installing the shower room, first prepare materials and tools.
Material preparation: The materials used for the shower room installation include frame, tempered glass, handles, pulleys and other accessories.
Tool preparation: Many tools are still needed during the shower room installation process. Before installation, these tools are best prepared. The tools used in this installation are tape measure, pencil, hammer drill, hand hammer, electric screwdriver, glue gun, manual screwdriver, wire cutters, etc.
2. Fixing method of shower room frame
The first step in the installation of the shower room is to locate and punch holes, and then to fix the frame. More tools are needed to locate and punch, and the operation is more complicated. Let's see how the installer has done this step.
1. Determine the drilling position: use tape measure + pen
The shower room must be fixed. The fixing method is generally to use screws, and the holes have been left on the aluminum alloy frame attached to the wall. The method is to put the frame on the wall, the tape measure to ensure the correct position, and then use a pencil to mark the wall.
2. Punching: use impact drill
The first step: After setting the position, the next step is to punch. Drilling is also divided into two steps. First, use a circular impact drill to drill a shallow hole in the marked position on the wall.
Construction tips: As the bathroom wall has been covered with wall tiles, it is relatively hard. To make drilling easier, you can wet the drill bit. In addition, you can splash water while drilling.
Step 2: After drilling the prototype marking holes, the next step is to use a helical drill bit with stronger impact force. Drill deeper holes on the basis of the shallower holes already made.
3. Install rubber particles: use hand hammer
Before screwing the screws into the wall, you first need to install expansion rubber particles in the holes, which can better tighten the screws. Use a hammer to knock the rubber particles into the hole.
4. Fixed frame: use electric screwdriver
After the above steps are completed, you can install the shower room frame, place the bottom frame on the water retaining strip, and then fix the frame. The method is to use an electric screwdriver to screw the screws into the wall to fix the frame.
3. Installation of shower room glass and top frame
After fixing the frame, the next step is to install the glass and top frame of the shower room. If the installation is not careful, it is easy to have problems such as failure to fix it and leaving seams.
1. Install tempered glass
If the shower room is composed of two pieces of tempered glass and two sliding doors, then after installing the bottom frame and the frame against the wall, the next step is to install two pieces of tempered glass. The installation of tempered glass needs to be placed first, and then the bottom is fixed.
The two pieces of tempered glass do not need to be moved, so they need to be fixed with accessories. The first is to use a U-shaped accessory to clamp the main, and then use pliers and a screwdriver to fix the nuts and screws of the connection part with the bottom frame.
2. Install the top frame
Step one: After the installation of the two pieces of tempered glass, you can install and fix the top frame. In fact, after the top frame is installed against the wall border, you need to try to install it to see if the docking is accurate.
The second step: Before the formal fixed installation, it is necessary to locate and drill holes to determine the fixed position.
The third step: handle the screws on the top frame to fix the parts in advance, so that the fixed glass and sliding door can be installed next.
Step 4: After drilling holes, installing rubber particles, and handling the connection parts, you can use an electric screwdriver and screws to fix the top frame.
4. Sliding door and handle installation in shower room
After the main frame is installed, the sliding door and the handle are installed. The importance of the sliding door is self-evident, the installation needs to be cautious, and must be adjusted to ensure that the sliding is smooth, and the closure is seamless.
1. Install the sliding door wheels
Generally, the sliding door glass has reserved holes for installing wheels. To move the sliding door, you need to use a pulley. First, you need to install the two wheels above the sliding door, install the wheels, put them in the corresponding position, and then debug and install the lower wheels.
2. Fixed sliding door
After the sliding door is placed, it needs to be fixed. Fixing does not mean that it cannot be moved at all, but that it is not allowed to leave the frame. The fixing method is still the same, use pliers and screwdriver to fasten the connector.
3. Debugging sliding door
After the sliding door is installed, there must be no shortage of debugging. Try to see if the sliding door opens and closes smoothly and closes without gaps. If there is a gap, you need to take a method to debug it.
4. Install the sliding door handle
The sliding door also needs to be equipped with a handle, which is relatively simple to install. First separate the handles, then align the holes on the glass and fix them with screw connections.
5. Apply glass glue to the gap
After the shower room is basically installed, it needs to be waterproof. Using glass glue sticks, apply glass glue on the aluminum frame and wall, etc., which can effectively prevent water penetration in the future.
6. Finishing the installation
At this point, the installation of the shower room has been completed, and finally the finishing work. Wipe the entire shower room clean with a rag, etc. In addition, put away the installation tools and remaining accessories, and pay attention to the protection of the finished product.
The above is the entire content of the shower room installation . I hope it will help your decoration. More decoration content is on this website, so stay tuned.
More articles:
Considerations for the purchase of toilets
Smart bathroom Anhua smart toilet recommended
How to recommend Anwar toilet
Precautions for toto toilet installation Toto toilet installation
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Shower room glass brick glass sliding door glass door
Vitamins are organic compounds and vital nutrients that an organism requires in limited amounts. An organic chemical compound (or related set of compounds) is called a vitamin when the organism cannot synthesize the compound in sufficient quantities, and it must be obtained through the diet.
Your body needs them to work properly, so you grow and develop just like you should. They are essential for the normal growth and development of a multicellular organism. Once growth and development are completed, vitamins remain essential nutrients for the healthy maintenance of the cells, tissues, and organs that make up a multicellular organism; they also enable a multicellular life form to efficiently use chemical energy provided by food it eats, and to help process the proteins, carbohydrates, and fats required for respiration.
Antioxidant Vitamins,Natural Vitamins,Essential Vitamins,Anti Aging Vitamins
SINOCHEM PHARMACEUTICAL CO., LTD , https://www.sinochemnutrition.com