It is believed that the bosses or engineers who bought the salt spray tester must be quite familiar with the salt sprayer. However, it is usually learned from the manual or from the manufacturer's staff. It is usually only known to one, or remember, or forget. However, it doesn't matter. Ai Siyi does a little supplement for everyone and hopes to help everyone.
First introduce the salt spray test machine body material and working principle, salt spray cabinet body with light gray PVC plate, thickness 5mm, durable temperature at 65 °C solid structure; body test chamber cover transparent acrylic impact resistant plate, thickness 5mm . Inside and outside the edge of the double layer thickening to prevent distortion due to long-term high temperature; concealed integrated reagent bottle, easy to clean, easy to operate; pressure air barrel using SUS#304 stainless steel high pressure barrel insulation effect is best; test sample rack with plane points Degree, can be adjusted to any angle, the fog falling on all sides, fog completely consistent, accurate test results, test sample placement number.
The salt spray tester (Litest.com) is composed of a salt water tank, a solenoid valve, a pneumatic system, a pressure barrel, and a nozzle. The pump sends salt corrosion solvent from the internal solvent tank to the nozzle and mixes the compressed air. The compressed air is humidified on the way to the nozzle through the bubble tower, and the nozzle atomizes the air containing the salt corrosion solvent into a corrosive aerosol. The pressure tank is detachable for easy removal and washing. When the low level switch of the pressure tank detects a low water level, the pressure tank heater is turned off and the spray pump stops. The pressure tank is automatically filled with the water filling solenoid valve until the high water level switch detects a high water level. The test continues while the water filling solenoid valve is stopped. The variable speed peristaltic pump controls the amount of corrosive solvent in the automatic sprayer, and the air pressure regulates the distance of the spray. There is a solvent tank inside the box, and for most of the tests, it can be guaranteed to run for 7 days or more. The solvent tank has an integral salt filter and a built-in alarm, which alerts the operator when the amount of solvent is low. The dry system is composed of fan, evaporator air heater, diffusion plate, pipeline, etc. Under the drying function, the blower passes the indoor air through the air heater into the cabinet, thus creating a low humidity environment in the cabinet. The tank temperature is controlled by the tank heater and air heater. A high volume air blower can also change the temperature very quickly, enabling rapid cycling. When the temperature inside the chamber is required to be higher than the ambient temperature of the test chamber, the air heater operates and the air flow enters the chamber from the blower through the energized air heater.
The above information is sourced from the technical research department of Ai Sihao Testing Instrument Co., Ltd. If you have other questions you need to consult, you can call Ai Siwei customer service phone or login URL:!