Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand carbon dioxide incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
The carbon dioxide incubator is widely used in the research and production of medicine, immunology, genetics, microbiology, agricultural science, and pharmacology. It has become one of the most commonly used conventional instruments in the above-mentioned laboratories. It is formed by simulating in the incubator body. A growth environment similar to cells / tissues in organisms such as constant pH (pH value: 7.2-7.4), stable temperature (37 ° C), high relative humidity (95%), stable CO2 level (5% ), A device for in vitro culture of cells / tissues. Users around the world have two basic requirements for carbon dioxide incubators. One is that carbon dioxide incubators can provide the most accurate and stable control of temperature, carbon dioxide concentration and humidity, so as to facilitate the progress of their research work; second, require carbon dioxide The incubator can effectively prevent microbial contamination in the incubator, and can eliminate pollution regularly to protect research results and prevent sample loss. Therefore, the most important thing for teachers who buy carbon dioxide incubators is their high reliability, prevention and control of pollution, and ease of use.
Temperature control 1. Heating method: air-jacket heating and water-jacket heating, both heating systems are accurate and reliable, and at the same time they have their own advantages and disadvantages. Water jacket heating is to maintain a constant temperature by surrounding the inner box with an independent water jacket layer. Its advantages: water is a good thermal insulation substance. When a power failure occurs, the water jacket system can Maintain the temperature accuracy and stability in the incubator for a relatively long time (the time to maintain the temperature constant is 3-4 times that of the gas-jacketed system), which is conducive to the unstable experimental environment (such as useful electricity restrictions or frequent power failure ) And users who need to maintain long-term stable cultivation conditions. Air-jacket heating directly heats the inner box through heaters located in the gas jacket layer of the box, also known as six-sided direct heating. Compared with the water jacket type, the air jacket type has the characteristics of faster heating and faster temperature recovery than the water jacket type incubator, which is particularly beneficial for short-term cultivation and cultivation that requires frequent opening and closing of the door. In addition, for users, the air jacket design is simpler than the water jacket type (the water jacket type needs to add water, empty and clean the water tank, and constantly monitor the operation of the water tank). 2. Temperature control system: Maintaining a constant temperature in the incubator is an important factor for maintaining healthy growth of cells, so an accurate and reliable temperature control system is an indispensable important part of the incubator. In order to make the incubator work more stably, we recommend users to choose carbon dioxide incubators with independent triple temperature control function, that is, temperature control, over temperature alarm control and ambient temperature monitoring.
Haozhuang adhering to the concept of quality first service first, dedicated service!
The hydraulic baler includes a bracket with a bottom plate and front and rear side baffles, a jack is installed on the bracket, the jack is provided with a piston rod, a vertical push plate is connected to the right end of the piston rod, and a push material is connected to the right side of the push plate Slats, the gap between the adjacent pushing slats is the rope-penetrating groove on the board; the upper right part of the bracket has a presser upper baffle, and the bracket on the left side of the presser upper baffle has a feed inlet; front and rear sides The brackets on the right side of the baffle are fixedly connected with front and rear side bars respectively, and the gap between adjacent side bars is a rope hole; the right end of the bracket has a discharge port, and the right end of the bracket at the discharge port is hinged with a door panel and a door panel Door slats are connected to the left side, and the gap between adjacent door slats is the rope slot on the door; the cavity enclosed by the front and rear side baffles, the pusher plate and the bottom plate is the feed cavity, the front and rear side baffles, and the material The cavity enclosed by the upper baffle, the door plate and the bottom plate is the extrusion cavity; the door plate and the right end of the bracket are fixedly connected with a locking device. The size of the package can be adjusted within a certain range as required.
Horizontal Baler,Hydraulic Baler Machine,Hydraulic Baling Machine,Hydraulic Baling Press Machine
Jining Myway Machinery Co., Ltd. , https://www.mwpackall.com